Tanning Bed Lamps

Tanning bed bulbs are used in every tan bed or suntan lamp on the market. When you are buying a new or especially a used tanning bed, take a good look at the lamps. Ensure that they are real tanning lamps and meet the FDA guidelines for health and safety. You should also consider how easy it is to get at the bulbs. Be sure that the bulbs are easy to change when needed. It is quite important and a lot cheaper if you can perform such simple maintenance yourself, if you buy a home tanning bed.

There are two completely different sorts of lamps used in conventional and high pressure beds. Make sure you get the right tanning bed lamps for your sun bed, because you cannot use any bulbs you like. If you are purchasing replacement bulbs on the Internet, check the make and model of your existing bulbs carefully. Make sure that the lamps you are buying are suitable for your bed.

High Pressure Sunbed Bulbs: high pressure beds use quartz lamps in various sizes. The gases used in these lamps are pressurized to slightly higher than atmospheric pressure. The bulbs in these beds are located in the hood of the bed, so that you tan from above only. When you have tanned the skin on one side of your body for about 10-12 minutes, you turn over and tan the other side. The flat bed of these tanners is a lot more comfortable than a conventional sun bed.

The biggest advantage of these lamps is the short time you have to spend on the bed. Since you tan faster, you need to spend less time in the salon, which means it works out cheaper. You can achieve the level of tan you require in about three weeks of three to five sessions each week. With a conventional bed, it would take you at least a month to achieve the same depth of colour. Maintaining your tan is much easier too. You only need two or three sessions each month to maintain the colour, compared with that many sessions every week on a low pressure bed. Many of these lamps produce UVA rays only, not UVB rays which are responsible for burning.

Conventional Tanning Bed Bulbs: Conventional, or low pressure sunbeds use long tube lamps that look like household fluorescent tubes. The lamps are located above and below the tanning bed, which means that all the body parts are browned at the together, without having to roll over during the tanning session.

Conventional beds use UVA and UVB rays in varying mixes. Some use both and others use mostly UVA with a bit of UVB rays. UVA rays are responsible for the (premature) ageing effects on the skin and UVB rays are the burning rays that produce sunburn when you are outside in the sun. It is very important to discover which type of rays your tan bed emits. You must be sure to replace your existing bulbs with comparable new lamps after about 1,000 hours of use.

Another factor when selecting the type of bed you use at home or in the salon, is the tanning bed lotion you will use. Different lotions are better for each type of bed. The staff at your tanning salon can help you choose a lotion that will work for the bed you are using and your skin type. No matter what bed you are using, you should definitely always use a lotion. Lotions help you tan more quickly and moisturise your skin at the same time.

Do you want to discover more about tanning bed bulbs? If you do, please go over to our web site on tanning bed bulbs You are welcome to reprint this article - but get your own unique content version here.

Post Footer automatically generated by Add Post Footer Plugin for wordpress.

September 09 2009 | Acne | No Comments »

Tanning Bed Lamps

Tanning bed bulbs, as used in up-market tanning beds, are a big part of the secret to that perfect tan. You can have any type of tan you require with the wide variety of lamps available on the market for sun beds. There are deep-tanning lamps, bronzing bulbs, face lamps and plenty of others too. These high-tech bulbs employ the best technology to tan you comfortably and in safety.

Furthermore, there is a different lamp for every kind of skin too. The sun bed industry produces different lamps for dark to light skin colours. Besides that, you can have a soft tan, a golden tan, a bronze tan, or one the deepest of darkest tans you have ever seen. You can also change the kind of lamp, as your tan progresses, so that you can achieve any combination of quite amazing results.

A tanning bulb is like having your own source of sunlight in a bottle. In fact, it is even better, because you are in control of it! Modern tanning bed bulbs are manufactured to the strictest standards and so are very safe. The sunbed industry and the government have implemented strict rules to guarantee your safety. So, if you carefully follow the instructions supplied with the bulbs, you may feel confident that you will not be putting your health at stake in order to look like a Hollywood film star.

The UV rays that they emit are below the proscribed safety limits to ensure you stay safe, healthy and tanned. Furthermore, there are plenty of choices available to you, varying from UVB and UVA combinations to only UVA. It is quite simply your choice. So, why not choose your tanning bed lamp and give the sun a helping hand?

Sun bulbs are ultraviolet-emitting devices that serve as the primary element of the various sorts of tanning beds and booths on the market. Tanning bed bulbs have as their main purpose the enhancement of a cosmetic tan, although these bulbs also have a reputation for the successful treatment of eczema and psoriasis. The depth and type of tanning produced depends on the spectrum of light produced by the tanning lamps and the vast majority of them produce more ultraviolet light than the sun.

Nearly all tanning bulbs use a unit called a 'ballast' to regulate their power consumption. The ballast stabilizes the flow of electrical energy inside the lamp and is required to ensure that the bulbs use only the necessary amount of wattage that they require in order to work effectively.

There are different kinds of tanning bulbs on the market including reflector sunbed lamps and high output lamps. The majority of lamps fall into two main categories: high pressure and low pressure types. (Within the tanning industry, it is usual to refer to high pressure tanning lamps as bulbs and low pressure tanning bulbs as lamps). Both high and low pressure tanning bulbs require a lack of oxygen in its housing.

High pressure tanning bulbs range in length from three to five inches and operate with 250 to 2,000 watt ballasts, although 400 watt high pressure tanning bulbs are the most popular. They are usually incorporated in the face tanning compartment of a sun bed. High pressure tanning bulbs are most often manufactured from quartz glass and an extra specialized coating, which is essential to filter out the lethal UVC ultraviolet rays.

HP tanning bulbs contain a small amount of mercury or argon and produce ultraviolet light in high concentration. The handling of high pressure tanning bulbs should be performed very carefully and never with naked hands, because even a tiny amount of oil from your hands can cause the bulb to fail prematurely or even crack and the resultant spillage of mercury is potentially very serious. High pressure tanning bulbs ought to be changed after roughly 1,000 hours even though they will continue to produce light for up to 10,00 hours

Low pressure tanning lamps are very similar to normal fluorescent tubes, but the glass tube of low pressure tanning bulbs naturally filters out the harmful UVC ultraviolet rays. Low pressure bulbs have a useful lifespan of between 600 and 1,600 hours with 1,000 hours being the norm again.

Post Footer automatically generated by Add Post Footer Plugin for wordpress.

August 26 2009 | Acne | No Comments »