This is all very well if you have your home in a hot part of the country, but if you did you would not need to keep topping your tan up anyway. Therefore people turn to tanning beds, tanning booths and tanning lamps. Some people buy their own tanning bed or booth, but most people go to a tanning salon. If you have a spare room and some spare money, owning your own tanning bed is definitely a superlative luxury.

Having your own tanning bed means that you do not have to plan journeys to the tanning salon, that there is no travelling or waiting and that your tanning bed is always waiting for you. However, you will be unsupervised, so it is a very good idea to read up on the health and safety advice associated with tanning beds. There should have been a booklet with the tanning bed when you bought it, but if you bought it second hand it could have been mislaid.

If your safety pamphlet has been lost, you could write to the manufacturers and suggest to pay for a replacement or you could just follow the general advice that applies to all tanning beds. Another good idea is to take a few sessions at a tanning salon and learn as much as you can. However, in general, treat your tanning bed as you would the sun in the tropics, that is with a great deal of respect.

The first thing you definitely have to do before getting onto your tanning bed is rub a sun tan lotion which includes a moisturizer onto your skin. This is where you will have to employ the most prudence. When you are outside in the sun, you want to block some of the sun's rays, because you want to spend a couple of hours outside.

However, in a way, the opposite is the case on a tanning bed, you want to get bronzed and you do not want to spend hours lying on the bed. Therefore, you will need a specialized moisturizer, tanning lotion. There are enough of them in the pharmacy, just ask.

A lot of people like to wear a head scarf or bathing hat to stop their hair from drying out. Then there are safety precautions such as goggles to take care of your eyes. Never, in any circumstances, look directly into a tanning lamp while it is on without eye protection. If you are going for an all over tan, you might find it useful to put a few sticking plasters or band-aids over your pink bits or men might need a hankie or a flannel.

Check your tanning bed's safety timer, before using the bed for the first time and regularly after that. Make sure that it is precise and that you can depend on it. After the tanning bed session, shower and remoisturize to replenish your skin, but not with the same tanner-moisturizer you used to tan with.

Do you want to find out more about commercial tanning beds? If so, just visit our website on Tanning Bed Bulbs

Post Footer automatically generated by Add Post Footer Plugin for wordpress.

Although the most advanced method of getting a tan is the use of a tanning bed or tanning booth, not everybody can afford to buy their own machine or go to a salon four times a month in order to have their tan refreshened, so the do-it-yourself solutions have become more and more prevalent.

A self tanning spray is a cosmetic product frequently containing DHA that can be employed at home as a sunless tanning solution. DHA is a chemical that causes a reaction with the skin's amino acids, which in turn causes the turning of the top layer of skin a brownish colour. The outcome of a self tanning spray lasts for about six or eight days, if you are wise not to take too long in the shower, if you shun using too a harsh soap and if you do not rub yourself too hard with the towel.

Self tanning presents several challenges and so, while it is less expensive than treatment in a commercial tanning salon, it is also more difficult to get a satisfactory result. It is more difficult to achieve an even tan when using a self tanning spray. The coloring solution needs to be atomized in a thin film with great care not to overlap too much. Overlapping leads to darker tan shades on certain body areas.

Therefore, another drawback of the self tanning spray is that you may need another person's assistance for the process. The back for example is very tricky to spray unless there is someone to assist you. The same problem presents itself for the back of the legs, the nape of the neck and the bottom. If you ask a friend to help you with the tanning, it will make the process a lot simpler.

You must be especially cautious to safeguard your eyes, your lips, ears and other delicate body parts. It is also possible to stain your nails and palms when using a self tanning spray. You could remove this problem by using gloves or wet wipes whenever essential so as not to permit the tanning agent to dry on the palms or your hands or your nails.

Then, last but not least, do not spray too much fluid on your body, because the result may be an unnatural orange glow or a somewhat uneven tan. Although many people frequently use these cans of self tanning spray in its assorted forms, there is no doubt about it that they are a lower quality solution when compared to the superior, but more highly-priced tanning bed or tanning booth.

Do you want to find out more about commercial tanning beds? If so, just visit our website on Tanning Bed Bulbs

categories: tanning sprays,tanning,skin care,acne,holiday,home improvement,health,fitness,beauty,self improvement,equipment,family,skin cancer,other

Post Footer automatically generated by Add Post Footer Plugin for wordpress.

The methods that some people employ in order to get a tanned skin consist of getting a tan outdoors from the sun itself, but also, tanning beds, tanning booths, spray on tanners, self tanning lotions and tanning pills. In part, the decision which of these methods you select, depends on the length of time that you can spare to get a perfect tan.

Some people opt for tanning pills, but in reality, they work a little differently from the other, more usual methods. For example, lotions work by spreading some of the liquid, usually oil based, on different parts of your body. It is your choice which parts of you, you want to change the colour of. However, tanning pills need to be ingested orally and so will affect the whole of your body. Furthermore, you will need to select which tanning pills to take, because, unlike lotions, if you use tanning pills, you will have fewer colour choices.

You should be well aware of this important point, because you will need to choose a depth of tan that does not contrast too unfavourably with the colour of other parts of your body like your hair, eyes, lips, etc. You can get these tanning pills in the same shops as you purchase your other tanning requirements.

You must however check the labeling to find out if there are any precautions you will have to take. For example, one of the most important safety measures that you can take, is to see if you might have an allergic reaction to the tanning pills.

Apart from this though, you might also want to find out just what all the media hype over tanning pills is all about. This research will also assist you to decide which of the different tanning pills on the market is the right one for you. In addition, if you look on the Internet, you will get the statistics on the number of people who have encountered problems after using these tablets. At this point in time, you will discover that there are three firm favourites when it comes to tanning pills.

These tanning pills are called EluSun, Deep Tan and Mayan Secrets. The main ingredient for two of these makes is carerenoids. This substance causes the top layer of skin to turn a pinkish colour. The colour might darken over time, but it is necessary for you to keep taking these pills for as long as you require the tan.

The main disadvantage of tanning pills is that these pills are just as dangerous to your health as sun bathing on the beach for hours at a stretch. Once you have found out all the information you can, you will have to decide whether taking tanning pills is worth the risk to your health, just to have tanned skin colour.

Do you need to find out more about commercial tanning beds? If you do, just visit our web site on Tanning Bed Bulbs

Post Footer automatically generated by Add Post Footer Plugin for wordpress.

There are two completely different sorts of lamps used in conventional and high pressure beds. Ensure you get the right sun bed bulbs for your sun bed, because you cannot use any bulbs you like. If you are ordering replacement bulbs on the Internet, check the make and model of your existing lamps carefully. Make sure that the bulbs you are ordering are made for your bed.

High Pressure Bulbs: high pressure beds use quartz lamps in a variety of sizes. The gases inside these bulbs have a pressure that is slightly higher than atmospheric pressure. The lamps in these beds are located in the top of the bed, so that you tan from above only. When you have tanned the skin on one side of your body for about 10-12 minutes, you turn over and tan the other side. The bed of these devices is much more comfortable than a conventional tanning bed.

The biggest benefit of these bulbs is the short time you have to spend on the bed. Since you tan faster, you need to spend less time in the salon, which means it works out cheaper. You can achieve the level of tan you require in about three weeks of three to five sessions a week. With a conventional bed, it would take you at least a month to achieve the same level of colour. Maintaining your tan is much easier too. You only need two or three sessions each month to maintain the colour, compared with that many sessions every week on a conventional bed. Many of these lamps use UVA rays only, not UVB rays which are responsible for burning.

Conventional Sun Bed Lamps: Conventional, or low pressure beds use long tube lamps that look like normal fluorescent tubes. The lamps are situated in the top and the bottom of the sun bed, which means that all the body areas are tanned at the same time, without needing to roll over during the tanning session.

Conventional beds use UVA and UVB rays in varying mixes. Some use both rays and others emit mostly UVA with some UVB rays. UVA rays are responsible for the (premature) ageing effects on the skin and UVB rays are the burning rays that produce sun burn when you are outside in the sun. It is very important to determine which kind of rays your tan bed's bulbs emit. You must ensure you replace your existing bulbs with lamps of the same specifications after about 1,000 hours of use.

Another factor when selecting the type of bed you use at home or in the salon, is the tanning bed lotion you will use. Different lotions are better for each type of bed. The staff at your tanning salon can help you choose a lotion that will work for the bed you are using and your skin type. Regardless of the bed you are using, you should certainly always use a lotion. Lotions help you tan more quickly and moisturise your skin at the same time.

Do you want to discover more about tanning bed bulbs? If you do, please visit our web site on tanning bed bulbs Visit the Uber Article Directory to get a totally unique version of this article for reprint.

Post Footer automatically generated by Add Post Footer Plugin for wordpress.

There are two completely different sorts of lamps used in conventional and high pressure beds. Make sure you get the right tanning bed lamps for your sun bed, because you cannot use any bulbs you like. If you are purchasing replacement bulbs on the Internet, check the make and model of your existing bulbs carefully. Make sure that the lamps you are buying are suitable for your bed.

High Pressure Sunbed Bulbs: high pressure beds use quartz lamps in various sizes. The gases used in these lamps are pressurized to slightly higher than atmospheric pressure. The bulbs in these beds are located in the hood of the bed, so that you tan from above only. When you have tanned the skin on one side of your body for about 10-12 minutes, you turn over and tan the other side. The flat bed of these tanners is a lot more comfortable than a conventional sun bed.

The biggest advantage of these lamps is the short time you have to spend on the bed. Since you tan faster, you need to spend less time in the salon, which means it works out cheaper. You can achieve the level of tan you require in about three weeks of three to five sessions each week. With a conventional bed, it would take you at least a month to achieve the same depth of colour. Maintaining your tan is much easier too. You only need two or three sessions each month to maintain the colour, compared with that many sessions every week on a low pressure bed. Many of these lamps produce UVA rays only, not UVB rays which are responsible for burning.

Conventional Tanning Bed Bulbs: Conventional, or low pressure sunbeds use long tube lamps that look like household fluorescent tubes. The lamps are located above and below the tanning bed, which means that all the body parts are browned at the together, without having to roll over during the tanning session.

Conventional beds use UVA and UVB rays in varying mixes. Some use both and others use mostly UVA with a bit of UVB rays. UVA rays are responsible for the (premature) ageing effects on the skin and UVB rays are the burning rays that produce sunburn when you are outside in the sun. It is very important to discover which type of rays your tan bed emits. You must be sure to replace your existing bulbs with comparable new lamps after about 1,000 hours of use.

Another factor when selecting the type of bed you use at home or in the salon, is the tanning bed lotion you will use. Different lotions are better for each type of bed. The staff at your tanning salon can help you choose a lotion that will work for the bed you are using and your skin type. No matter what bed you are using, you should definitely always use a lotion. Lotions help you tan more quickly and moisturise your skin at the same time.

Do you want to discover more about tanning bed bulbs? If you do, please go over to our web site on tanning bed bulbs You are welcome to reprint this article - but get your own unique content version here.

Post Footer automatically generated by Add Post Footer Plugin for wordpress.

Tanning bed bulbs, as used in up-market tanning beds, are a big part of the secret to that perfect tan. You can have any type of tan you require with the wide variety of lamps available on the market for sun beds. There are deep-tanning lamps, bronzing bulbs, face lamps and plenty of others too. These high-tech bulbs employ the best technology to tan you comfortably and in safety.

Furthermore, there is a different lamp for every kind of skin too. The sun bed industry produces different lamps for dark to light skin colours. Besides that, you can have a soft tan, a golden tan, a bronze tan, or one the deepest of darkest tans you have ever seen. You can also change the kind of lamp, as your tan progresses, so that you can achieve any combination of quite amazing results.

A tanning bulb is like having your own source of sunlight in a bottle. In fact, it is even better, because you are in control of it! Modern tanning bed bulbs are manufactured to the strictest standards and so are very safe. The sunbed industry and the government have implemented strict rules to guarantee your safety. So, if you carefully follow the instructions supplied with the bulbs, you may feel confident that you will not be putting your health at stake in order to look like a Hollywood film star.

The UV rays that they emit are below the proscribed safety limits to ensure you stay safe, healthy and tanned. Furthermore, there are plenty of choices available to you, varying from UVB and UVA combinations to only UVA. It is quite simply your choice. So, why not choose your tanning bed lamp and give the sun a helping hand?

Sun bulbs are ultraviolet-emitting devices that serve as the primary element of the various sorts of tanning beds and booths on the market. Tanning bed bulbs have as their main purpose the enhancement of a cosmetic tan, although these bulbs also have a reputation for the successful treatment of eczema and psoriasis. The depth and type of tanning produced depends on the spectrum of light produced by the tanning lamps and the vast majority of them produce more ultraviolet light than the sun.

Nearly all tanning bulbs use a unit called a 'ballast' to regulate their power consumption. The ballast stabilizes the flow of electrical energy inside the lamp and is required to ensure that the bulbs use only the necessary amount of wattage that they require in order to work effectively.

There are different kinds of tanning bulbs on the market including reflector sunbed lamps and high output lamps. The majority of lamps fall into two main categories: high pressure and low pressure types. (Within the tanning industry, it is usual to refer to high pressure tanning lamps as bulbs and low pressure tanning bulbs as lamps). Both high and low pressure tanning bulbs require a lack of oxygen in its housing.

High pressure tanning bulbs range in length from three to five inches and operate with 250 to 2,000 watt ballasts, although 400 watt high pressure tanning bulbs are the most popular. They are usually incorporated in the face tanning compartment of a sun bed. High pressure tanning bulbs are most often manufactured from quartz glass and an extra specialized coating, which is essential to filter out the lethal UVC ultraviolet rays.

HP tanning bulbs contain a small amount of mercury or argon and produce ultraviolet light in high concentration. The handling of high pressure tanning bulbs should be performed very carefully and never with naked hands, because even a tiny amount of oil from your hands can cause the bulb to fail prematurely or even crack and the resultant spillage of mercury is potentially very serious. High pressure tanning bulbs ought to be changed after roughly 1,000 hours even though they will continue to produce light for up to 10,00 hours

Low pressure tanning lamps are very similar to normal fluorescent tubes, but the glass tube of low pressure tanning bulbs naturally filters out the harmful UVC ultraviolet rays. Low pressure bulbs have a useful lifespan of between 600 and 1,600 hours with 1,000 hours being the norm again.

Post Footer automatically generated by Add Post Footer Plugin for wordpress.

Tanning bed bulbs are used in each sun bed or suntan lamp in the shops. When you are purchasing a new or especially a used suntan bed, make a good examination of the lamps. Ensure that they are proper tanning lamps and comply with the FDA regulations with regard to health and safety. You should also estimate how easy it is to get at the bulbs. Make sure that the lamps are not difficult to change when needed. It is quite important, and a lot cheaper, if you can perform such routine maintenance yourself, if you have a home tanning bed.

There are different types of bulbs used in conventional and high pressure beds. Make sure you buy the right sun bed lamps for your bed, because they are not interchangeable. If you are ordering replacement bulbs on the Internet, check the make and model of your existing lamps carefully. Ensure that the bulbs you are buying are made for your bed.

High Pressure Sunbed Bulbs: high pressure beds use quartz lamps in a variety of sizes. The gases used in these bulbs are pressurized to slightly higher than atmospheric pressure. The lamps in these beds are located in the hood of the bed, so that you tan from above only. When you have tanned the skin on one side of your body for about 10-12 minutes, you turn over and tan the other side. The flat bed of these devices is much more comfortable than a conventional tanning bed.

One of the biggest advantage of these HP bulbs is the amount of time you need to spend on the tanning bed. Since you tan faster, you need to spend less time in the tanning salon, which means it works out cheaper. You can get the depth of tan you require in about three weeks of three to five sessions a week. However, with a low pressure bed, it would take you at least a month to acquire the same level of colour. Maintaining your tan is a lot easier too. You only need two or three sessions a month to maintain the colour, as opposed to four times that many visits to a low pressure salon bed. Many of these bulbs produce UVA rays only, not UVB rays which cause sunburn.

Conventional Tanning Bed Bulbs: Conventional, or low pressure sunbeds use long tube lamps that resemble household fluorescent tubes. The lamps are situated above and below the tanning bed, which means that all the body areas are browned at the same time, without having to change positions during the tanning session.

Low pressure beds use UVA and UVB rays in varying mixes. Some use both and others use mostly UVA with a bit of UVB rays. UVA rays are responsible for the (premature) ageing effects on the skin and UVB rays are the burning rays that produce sunburn when you are outside in the sun. It is very important to determine which type of rays your tan bed emits. You must be sure to replace your existing bulbs with comparable new lamps after about 1,000 hours of use.

Something else to think about when selecting the type of bed you use at home or in the salon, is the tanning bed lotion you will use. Different lotions suit different sorts of beds. The staff at your tanning salon will be able to help you select a lotion that will work for the bed you are using and your skin type. Regardless of the bed you use, you ought to definitely always use a lotion or a cream, because they will moisturise your skin and help you get a Hollywood tan more quickly.

Post Footer automatically generated by Add Post Footer Plugin for wordpress.